E9 12 Volt 150 Amp Circuit Breaker Circuit Breakers Panel Red LED Backlit On Off Rocker Switch for Boat RV

Name:150A Circuit Breaker Panel With Red LED Backlit Single Lamp Boat Rocker Switch ON-OFF 2-in-1 Combination
Product Model:JD-AOS11013-150A
Product Weight:188g
Gross Weight:232g
Product Packaging:Cardboard Box
Product Size:106*100*40mm
Rated Voltage:12/24V
Packaging Size:110*110*70mm
Features
Housing material is thermoplastic, UL rated 94V0.
Splash-proof and dust-proof rating is IP67. Illumination type is IP66.
Operating temperature: -32°C to 82°C (-25°F to 180°F)
Storage temperature: -34°C to 149°C (-30°F to 300°F)
Thread size: 1/4"-28 thread/inch.
Rated torque is 100in-lb (11.3nm) at 1/4".
Type 3 - Manual reset (Switchable)
Surface mount, including protection screw insulators.
Copper rivets, nickel-plated screws, stainless steel studs.
Compliant with SAE J1428, J1625, J553 (200A), J1171, UL1500 (Ignition protection)
Circuit breaker rated current: 150A
Circuit breaker shell off current test data: Rated current 100A circuit breaker; at 25°C, at 1.35 times the rated current (202.5A), it trips within equal to or less than 1800 seconds; At 2 times the rated current (300A), it trips within approximately 60 seconds; Note: The test data is based on a 25°C ambient environment. The tripping duration is influenced by the ambient temperature. When the operating environment temperature is lower than 25°C, the tripping duration will be extended. When the operating environment temperature is higher than 25°C, the tripping duration will be shorter. Refer to the curve diagram for reference; Switch Specifications:
Rated Power: 12V 20A; 24V 10A Product List: 1 set of combination panel, 3 pieces of 15CM switch harness (2 red, 1 black); 4 installation screws. Typical Applications: Solar Power Systems: In solar power generation systems, DC low-voltage circuit breakers are used to protect solar panels and battery packs from overload and short circuit damage. They can be installed at critical positions in the system to prevent abnormal currents from damaging batteries and other equipment.
Automotive and Marine Electrical Systems: DC low-voltage circuit breakers play an important role in the electrical systems of automobiles, trucks, boats, and other vehicles. They are used to protect batteries, generators, motors, and other electrical equipment from current overload and circuit shorts.

Industrial Control Systems: In industrial control systems, DC low-voltage circuit breakers are used to protect electrical equipment and control circuits. They can be used to control current, isolate circuits, and provide overload protection, ensuring the safe operation of the system.

Electronic Devices and Laboratories: DC low-voltage circuit breakers are also commonly used in electronic devices, laboratories, and research and development environments. They can provide quick disconnection and reconnection of circuits, protecting electronic equipment from excessive current or circuit failures.

In summary, DC low-voltage circuit breakers are suitable for many applications that require protection and control of DC circuits, including solar power systems, vehicle electrical systems, industrial control systems, and electronic devices and laboratories.